The cable is connectred to the trunck so that it can be disconnected easily if pulled towards the front. Here at Advance Auto Parts, we work with only top reliable Trunk Lock Cylinder product and part brands so you can shop with complete confidence. I used a broom handle shoved between the rear seats to activate the emergency release handle on the back of the trunk lid. Click the link below:--- Idle Problem? Once the cable was returned to its location I used needle nose pliers to sqeeze the metal tighter around the cable. Jul 17, 2012 In my '04 corolla I can unlatch the left passenger seat back by reaching behind the left seat back and sticking my finger up into the second of 3 quarter sized holes.
. I could not turn the key to the right and could not get access to the trunk because the lever next to the driver seat was disengaged. It turned out that the cable came off in the asembly probably from slamming the lid shut. Posted on Oct 13, 2009 It can be low fuel pressure issue or clogged fuel pump. The way I solved this problem is as follow:on the back driver seat I pulled the back seat forward to leave an opening and snick my arm in the trunck.
The lock will be loose, and disconnect the lever that connects the lock to the latch. Jul 17, 2012 Get the Idle air control valve checked inspected. Or its engine related issues,--------------- Check the help link mentioned below to troubleshoot the problem: ------ Engine stalls when gas is given? Has low fuel flow and runs hot? This was better the damaging the rear seat by bending it to reach the seat releass mechanism. When it comes to your Toyota Corolla, you want parts and products from only trusted brands. Nov 28, 2012 There re few possibilities that can cause no idle issues. If you pull towards the back it will remain attached to the trunck. It took about 2 minutes.
For more troubleshooting,click the help,links below:--- Idle Problem? To do this, and with the trunk open, remove the cover holded by nine plastic pins. Then I grabbed the cable used to latch the seat and I pulled forward, i. Feel around for the holes. Advance Auto Parts has 1 different Trunk Lock Cylinder for your vehicle, ready for shipping or in-store pick up. Shop online, find the best price on the right product, and have it shipped right to your door. You can pull the latch at that point, but. So grab the cable an pull towards the front, and it will release itself.
Now you can open and close the trunk , and have time to call the dealer for a new lock. If the lock does not turn, you need to disconnect the lock from the mechanism, so that the driver seat lever can start working again. Remove the nuts with a rachet. Also its suggested to get more troubleshooting done. To troubleshoot the issue help links are provided below.
Apr 22, 2010 My 05 Corolla trunk would not open. I turned the key to the left and the lock turned left, engaging the valet parking mechanism. Do not break the pins. When I tapped it just right the lid popped open. Since the cable is flexible, you can pull it out of the trunk from the same the opening you put your arm, and then disenagage the driver back seat.
Some of our top Trunk Lock Cylinder product brands are. After removing the cover, you will see the lock holded by two nuts. Fold forward the back seat and get into the trunk and use the lever in the latch of the trunck to open it. At this point the driver seat lever will start working again. Close the trunk and verify that the driver seat lever opens the trunk.
. . . . . .