vintage oxford speaker codes sorted by
relevance

Admin10.08.2021

Dating Fender amps and speakers

The heavy transformers and copper chassis assembly were placed on the bottom of the amp cabinet.
7702
Admin20.08.2021

Dating Fender amps and speakers

including the voice coil gap.
9408
Admin15.08.2021

Dating Your Fender Amp

NOS 5751s recommended if lower gain is desired.
9003
Admin27.08.2021

Vintage Speaker Question

This tube does not need to be low in noise, however it should have good quality cathodes in order to handle the load.
8700
Admin24.07.2021

Welcome to Ron's Vintage

Preferred Series 7025 and Tung-Sol 12AX7 are suitable, 5751 not recommended.
39010
Admin23.07.2021

Help dating and identifying this Fender speaker

Like the Pro, the Concert wandered into the blackface era with 40 watts and no reverb but a tube combination that shrieked through a 4 x 10 speaker combination.
8400
Admin18.08.2021

The Speaker Shop Vintage and Antique Speaker Repair and Recone Services

Princeton AA1164 with reverb - Tube Package First tube is preamp, 7025 is specified.
Admin07.07.2021

Help dating and identifying this Fender speaker

Vibro Champ and Bronco AA764 - Tube Package Preamp tube is a 12AX7.
3408
Admin01.08.2021

Commonly Seen EIA Codes

The speaker is a blue frame P15N.
3701
Admin06.09.2021

Welcome to Ron's Vintage

Unfortunately, this was discontinued and later models have all the hardware suspended from the underside of the control plate.
6906
Admin31.08.2021

RARE Vintage OXFORD ALNICO SPEAKERS 8 Ohm 12 CHA 1, 33

Suggest a 12AX7 with high gain and reasonable quality, though very low noise or hum is not required.