Specially developed for extended service intervals. To achieve an effective, even coverage, use a spray with an adjustable nozzle and adjust the air-liquid ratio. Coils or stacks coated with this product can be pressed without additional lubricants. Steelworks: coke discharging machines, connections rods and scot blowers. It was formulated to protect and lubricate wire ropes by leaving a clean, non-drip, corrosion-resistant coating. Awarded the European Eco Label.
Thanks to its good release effect the product is suitable both for melted as well as for hot asphalt. The container is to be well sealed after each withdrawal. Highly effective additive systems ensure optimal wear protection even under unfavourable operating conditions. The product is to be used within 6 months of production for production date see bar code label. Suitable for many kinds of metal and metal-combinations. The equipment should be cleaned in this way if it is going to stand idle for any period of time.
Lubrication of plastic and rubber components where excellent elastomer compatibility is required. Application should occur via suitable spraying systems. It is based on an inorganic thickener, a careful blend of fluids and additives, chosen for their ability to meet the stringent requirements of the food industry. No one wants to buy it again and contacting support is almost useless. Oil change intervals can be extended. The product may not come in contact with zinc or galvanised materials. It shows excellent propulsive effects and forms a brown adhesive releasing film of high lubricity upon the engraved surfaces.
Soluble in white spirit and isoparaffins. The product is a well balanced choice of solid and pasty ingredients to provide an excellent spreading on hot metal surfaces, leaving a very thin, homogeneous, well adherent skin of high temperature resistant graphite. Offers good cold starting and lower oil consumption. NoteCleaning has to be done with water. Free from nitrite, amine, phosphate and silicates. Approved by well-known gear manufacturers.
The product may not come in contact with zinc or galvanised materials. Extreme wear protection guarantees a long lifetime of the components. Upon opening a pack, the product must be used within 2 years or within 5 years of date of manufacture, whichever is the sooner. Not miscible with other lubricants. There is only very slight residue from the carrier oil, and this residue has a favourable effect during subsequent lubrication. The lubricating film is resistant against high temperatures and extreme pressure.
You are logged in as. You will definitely end up finding several sites providing product codes and most of those codes do not work and waste your time. Aside from boosting attributes, the in-game overlay attributes supplied by the instrument are merely unusual. Upon opening a pack, the product must be used within 2 years or within 3 years of date of manufacture, whichever is the sooner. High-quality additives improve the ageing and oxidation stability. Not just that, using this utility you can also retrieve product keys from the cache file found in the external hard drive. It has excellent penetrating properties and forms a protective film, which reduces friction and protects against wear.
Special surface active additives improve the surface adhesiveness and the surface wetting properties over a wide temperature range. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry. Once the program is removed there are no traces in the Windows Registry. Also suitable for spraying equipment. Available as an aerosol spray. They are industrial gear oils with excellent demulsifying properties which can be used in all types of enclosed gear drives with circulation or splash lubrication systems.
Very low Evaporation tendency and low coking. The product may not get into contact with copper or zinc. Suitable as fill for life fluid according to manufacturer. Method of applicationPreferred manually by brushing or swabbing. They are based on a very stable synthetic thickener and base fluids with carefully selected additives chosen for their ability to meet the stringent requirements of the food industry at elevated temperatures. The diluted product must be kept in continuous motion either by a stirrer or circulation pump, to avoid settling out.
The recommended ratio is 1:80 to 1:120. The container is to be well sealed after each withdrawal. Attention is to be paid to a very economical application. The optimum proportions of lubricant to water should be determined in test runs. Especially developed for professional use in racing applications. Lubricants for all total-loss applications plain bearings, slideways, guides etc.